D SERIES FILL STATIONS

Description

System features :

• Larger gauge panel for all features
• Inlet and outlet 4″ gauges
• Safety air shut off valve when door is open
• Third party tested
• Front door steel plate
• Operator protection

D SERIES FILL STATION STANDARD FEATURES :

• The D series SCBA recharging system is a free standing and complete filling/de-fragmentation station for 2216/3000 or 4500 psig cylinders. The SCBA refilling station is of a fully enclosed design to contain a SCBA or SCUBA cylinder failure or ruptured fill hose.
• The Jordair D series fill stations are one of the safest the filling stations offered in Canada for the containment and recharging of SCBA cylinders.
• A fully enclosed SCBA containment system that encloses both the SCBA cylinders and the filling hoses with a
  tilting front access door. The door must be closed and locked before SCBA cylinders can be recharged.
• A toggle activated valve stops air flow to the filling points when the door is opened.
• The front access door is held in the closed position by a spring loaded pin type door lock.
• Heavy wall schedule 80 steel 8” pipe used to contain the SCBA cylinders within the recharge station.
• Anti-abrasion collars and liners in the SCBA containment sleeves to protect the exterior of the SCBA cylinders
  from abrasion damage during the filling process.
• 6000 psig inlet shut off valve to isolate the recharging station from the compressor and air storage cylinders.
• One anodised aluminum, self-venting and adjustable regulator with operating pressures from 0 to 6,000-PSIG
  inlets and 0 to 6,000-PSIG outlet pressures.
• Self-venting regulator comes complete with 4” inlet and discharge pressure gauges; gauges are rated for 7500 psig. Gauges read in both PSI and kPa.
• 2½” pressure gauges for 2216/3000 or 4500 psig filling, installed for each fill outlet to indicate SCBA recharge
  pressure. Gauges read in both PSI & kPa.
• Panel mounted SCBA cylinder shut off valves for 2216/3000 or 4500 PSIG fill positions.
• SCBA recharge assemblies are supplied for 2216/3000 or 4500 psig filling.
• A CRN certified safety relief valve is set for 2400/3200 or 4700 psig to protect the filling of the 2216/3000 or 4500 psig SCBA or SCUBA cylinders.
• The SCBA 4500 PSIG cylinder fill hose assemblies will only recharge the high-pressure 4.5 SCBA cylinders. If a 2216 SCBA cylinder is accidentally connected the 4500 PSIG filling hose the filling adaptor will automatically vent to atmosphere.
• All recharge hose assemblies are equipped with restriction orifices set to the CSA Z94.4 rate of 300 psig per
  minute, to control filling speed. When a cascade system is used, this prevents rapid cylinder expansion and
  significant pressure drop due to the compression heat created during a rapid refilling situation.
• All pressure piping conforms to ASME code B31.1 and B31.3